欧美天天综合网_国产成人精品一二三区_国产对白有声小说_国产精品自在线拍国产手机版 - 精品国产一区二区三区四区阿崩

1．1本船用臥式自吸離心泵符合CBM2218-82“船用臥式自吸離心泵型式和基本參數”及CBM2219-82“船用臥式自吸離心泵技術條件”的規定。

    The  Marine Horizontal  Self-sucking  Centrifugal Pump  meet the CBM2218-82”  Marine Horizontal  Self-sucking  Centrifugal Pump &Principal Parameters”and the CBM2219-82”The Technical Conditions of Marine Horizontal Self-sucking Centrifugal Pump”．

1．2本泵適用于輸送船舶艙底壓載水或用于海水冷卻、消防、衛生等方面，輸送溫度不高于70℃的海水或淡水。

    The pump Can be used on board a ship to pump and deliver bottom ballast water or sea water for cooling，fire，sanitary as well．The temperatures of the media transferred should not exceed 70℃．

1．3泵的性能參數應符合表1、表2的規定。

    The characteristics parameters of the pump should satisfy those 0ne given in Table 1 and Table 2.

2．1泵為臥式懸臂、單級、單吸。軸向進水。自吸泵采用外混合式泵體結構。泵體由吸水彎管、蝸殼、氣水分離腔等部分組成。蝸殼下部有軸向回流孔。

    The pump,with a horizontal suspension arm,is a single-stage,one-way  suction．axial entry,and self-sucking one．nle structure of the pump body IS of mixed flow type．The pump body is composed of a suction bend，a snarl casing，an air-water separating cavity and a water storage cbambeL At the bottom ofthe snail casing there is all axial return flow opening．

2．2后蓋內為密封腔，內裝有填料密封或端面密封。泵軸和葉輪的重量，以及葉輪產生的徑向力，由托架內的兩個向心軸承支承。泵和電機通過彈性聯軸器聯接并傳遞扭矩。

    Inside the nerar pump cover there is a sealed cavity,in which fiUer seal or axial seal is fitted．The weight ofthe pump shaft and the vane whirl，together with the radial force created by the vane whirl，is supported by the two centripetal bearings in the bracket．To convey torque，an elastic coupling joint is installed to connect the pump and themotor．

2．3泵體下部鑄出兩個底腳，泵與電機一起固定在底座上。皮帶輪傳動型式用戶必須在合同上注明，否則按供底座型式供貨。

    Two stands are cast to the lower part of the pump．Both the pump and the motor ale fixed to the base．Our customers who want pumps driven by belt pulley are suggested to specify it clearly in the contract SO as to avoid wrong shipment．The other model of pumps with a base will be delivered otherwise．

2．4泵體頂部及底部均有螺塞，分別作灌水和放水用。為了防止停車后泵內